7490 -
Telephone: 727-345-5292 CATALOG
#42241 fits (1963-79 CORVETTES
READ INSTRUCTIONS THOROUGHLY BEFORE BEGINNING!
Kit
Contains:
ITEM QTY DESCRIPTION
1 2 4-1/2 Diameter Reinforcing Pads
2 2 7/16 Grade 8 Studs
3 4 7/16 Hex Nuts
4 4 Flat Washers
5 4 Lock Washers
1.
Jack up rear of car and place on jack stands. Support differential housing with jack to
prevent rear cross member from being damaged or possibly breaking loose from
car frame. It is recommended
that Differential Cross
Member Kit be installed on one side of car at a time.
2.
Remove 7/16 hex head bolt holding rubber isolation bushing in place.
3.
Install supplied 7/16 stud with flat and lock washer as shown. Note:
Thread end of stud with least amount of threads into car frame.
4.
Place reinforcing pad onto stud as shown and secure with supplied hex
nut and washers.
